The Lindarets x Wolf Tooth GoatLink is simply the fastest route to improved wear and long-term shifting performance on wide-range one-by-ten drivetrains.
Conceived by Lindarets and developed with Wolf Tooth Components, the GoatLink improves chain wrap and reduces premature shifting degradation by replacing the Direct Mount link from compatible Shimano ten-speed rear derailleurs.
The US-made GoatLink installs in moments with little more than a 5mm Allen wrench. In most cases, the stock link can be removed and the GoatLink installed without the need for chain removal or additional cable or housing.
The GoatLink is optimized for use with Wolf Tooth’s 40- and 42-tooth Giant Cogs and all sizes of Drop-Stop chainrings- but will work with any 11-40t or 11-42t ten-speed cassette. The GoatLink is compatible with2013 or later Shimano ten-speed Shadow+ rear derailleurs that make use of the 8mm Direct Mount intermediate link to mount to standard derailleur hangers. Direct Mount-native frames and SRAM rear derailleurs are not supported. Compatible with Clutch type derailleur only.
Technical Details (subject to finalization):
Chain Wrap at 11t:
40t: Improved by 69%
42t: Improved by 53%
Free Chain at 11t:
40t: Improved by 25%
42t: Improved by 19%
Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary. You will NEVER need a longer B-screw when using a GoatLink
Jonathan B. published the 10/09/2019 following an order made on 10/09/2019
Parfait pour mon utilisation
Lemeltier H. published the 17/07/2019 following an order made on 17/07/2019
Grâce à cette petite patte en alu, un dérailleur chape moyenne accepte des cassettes 10 vitesses avec pignons jusqu'à 42 dents et cela fonctionne parfaitement !
Filippo T. published the 22/07/2017 following an order made on 22/07/2017
Guillaume C. published the 28/03/2017 following an order made on 28/03/2017
Bon produit mais beaucoup trop cher pour ce que c'est !